Nonlinear seismic trace interpolation
Research output: Contribution to conference › Paper › Research › peer-review
Standard
Nonlinear seismic trace interpolation. / Martinson, Douglas G.; Hopper, John R.
1990. 1633-1636 Paper presented at 1990 Society of Exploration Geophysicists Annual Meeting, San Francisco, United States.Research output: Contribution to conference › Paper › Research › peer-review
Harvard
APA
Vancouver
Author
Bibtex
}
RIS
TY - CONF
T1 - Nonlinear seismic trace interpolation
AU - Martinson, Douglas G.
AU - Hopper, John R.
N1 - Publisher Copyright: © 1990 Society of Exploration Geophysicists. All rights reserved.
PY - 1990
Y1 - 1990
N2 - The nonlinear correlation technique of Martinson et al. (1982) has been used to guide a nonlinear seismic trace interpolant in order to fill gaps in seismic surveys, replace bad traces and produce evenly spaced arrays. The correlation identifies corresponding features (reflectors) between adjacent seismic traces and quantifies the amount of travel time difference between the two seismic events. This information is used to construct synthetic (interpolated) traces, at any arbitrary distance between the correlated traces, which preserve dip and amplitude changes of the individual reflectors, assuming that such dip and amplitude changes occur linearly (or other specified functional form) between the correlated traces. Since each reflector can vary independently from the others, the full trace interpolant is nonlinear in nature. The technique is applied to a 48 channel, NMO corrected, CDP gather and to a stacked seismic section to demonstrate its use, sensitivities and limitations in processing and geologic interpretation studies. Traces synthesized in the CDP gather filling an artificial gap as wide as .75 km reproduce the true traces from the gap with remarkable fidelity (correlation coefficients between the synthetic and corresponding true traces are ≳0.85). With the seismic section, the interpolation is shown to aid in the geologic interpretation by increasing the spatial density, providing a clearer image of the potential structural evolution.
AB - The nonlinear correlation technique of Martinson et al. (1982) has been used to guide a nonlinear seismic trace interpolant in order to fill gaps in seismic surveys, replace bad traces and produce evenly spaced arrays. The correlation identifies corresponding features (reflectors) between adjacent seismic traces and quantifies the amount of travel time difference between the two seismic events. This information is used to construct synthetic (interpolated) traces, at any arbitrary distance between the correlated traces, which preserve dip and amplitude changes of the individual reflectors, assuming that such dip and amplitude changes occur linearly (or other specified functional form) between the correlated traces. Since each reflector can vary independently from the others, the full trace interpolant is nonlinear in nature. The technique is applied to a 48 channel, NMO corrected, CDP gather and to a stacked seismic section to demonstrate its use, sensitivities and limitations in processing and geologic interpretation studies. Traces synthesized in the CDP gather filling an artificial gap as wide as .75 km reproduce the true traces from the gap with remarkable fidelity (correlation coefficients between the synthetic and corresponding true traces are ≳0.85). With the seismic section, the interpolation is shown to aid in the geologic interpretation by increasing the spatial density, providing a clearer image of the potential structural evolution.
UR - http://www.scopus.com/inward/record.url?scp=84876293529&partnerID=8YFLogxK
U2 - 10.1190/1.1890080
DO - 10.1190/1.1890080
M3 - Paper
AN - SCOPUS:84876293529
SP - 1633
EP - 1636
T2 - 1990 Society of Exploration Geophysicists Annual Meeting
Y2 - 23 September 1990 through 27 September 1990
ER -
ID: 355635528