Fracture mode during cyclic loading of implant-supported single-tooth restorations
Publikation: Bidrag til tidsskrift › Tidsskriftartikel › Forskning › fagfællebedømt
Standard
Fracture mode during cyclic loading of implant-supported single-tooth restorations. / Hosseini, Mandana; Kleven, Erik; Gotfredsen, Klaus.
I: Journal of Prosthetic Dentistry, Bind 108, Nr. 2, 08.2012, s. 74.Publikation: Bidrag til tidsskrift › Tidsskriftartikel › Forskning › fagfællebedømt
Harvard
APA
Vancouver
Author
Bibtex
}
RIS
TY - JOUR
T1 - Fracture mode during cyclic loading of implant-supported single-tooth restorations
AU - Hosseini, Mandana
AU - Kleven, Erik
AU - Gotfredsen, Klaus
PY - 2012/8
Y1 - 2012/8
N2 - STATEMENT OF PROBLEM: Fracture of veneering ceramics in zirconia-based restorations has frequently been reported. Investigation of the fracture mode of implant-supported ceramic restorations by using clinically relevant laboratory protocols is needed.PURPOSE: This study compared the mode of fracture and number of cyclic loads until veneering fracture when ceramic and metal ceramic restorations with different veneering ceramics were supported by implants.MATERIAL AND METHODS: Thirty-two implant-supported single-tooth restorations were fabricated. The test group was composed of 16 ceramic restorations of zirconia abutment-retained crowns with zirconia copings veneered with glass-ceramics (n=8) and feldspathic ceramics (n=8). The control group was composed of 16 metal ceramic restorations of titanium abutment-retained crowns with gold alloy copings veneered with glass (n=8) and feldspathic ceramics (n=8). The palatal surfaces of the crowns were exposed to cyclic loading of 800 N with a frequency of 2 Hz, which continued to 4.2 million cycles or until fracture of the copings, abutments, or implants. The number of cycles and the fracture modes were recorded. The fracture modes were analyzed by descriptive analysis and the Mann-Whitney test (a=.05). The differences in loading cycles until veneering fracture were estimated with the Cox proportional hazards analysis.RESULTS: Veneering fracture was the most frequently observed fracture mode. The severity of fractures was significantly more in ceramic restorations than in metal ceramic restorations. Significantly more loading cycles until veneering fracture were estimated with metal ceramic restorations veneered with glass-ceramics than with other restorations.CONCLUSIONS: The metal ceramic restorations demonstrated fewer and less severe fractures and resisted more cyclic loads than the ceramic restorations, particularly when the metal ceramic crowns were veneered with glass-ceramics.
AB - STATEMENT OF PROBLEM: Fracture of veneering ceramics in zirconia-based restorations has frequently been reported. Investigation of the fracture mode of implant-supported ceramic restorations by using clinically relevant laboratory protocols is needed.PURPOSE: This study compared the mode of fracture and number of cyclic loads until veneering fracture when ceramic and metal ceramic restorations with different veneering ceramics were supported by implants.MATERIAL AND METHODS: Thirty-two implant-supported single-tooth restorations were fabricated. The test group was composed of 16 ceramic restorations of zirconia abutment-retained crowns with zirconia copings veneered with glass-ceramics (n=8) and feldspathic ceramics (n=8). The control group was composed of 16 metal ceramic restorations of titanium abutment-retained crowns with gold alloy copings veneered with glass (n=8) and feldspathic ceramics (n=8). The palatal surfaces of the crowns were exposed to cyclic loading of 800 N with a frequency of 2 Hz, which continued to 4.2 million cycles or until fracture of the copings, abutments, or implants. The number of cycles and the fracture modes were recorded. The fracture modes were analyzed by descriptive analysis and the Mann-Whitney test (a=.05). The differences in loading cycles until veneering fracture were estimated with the Cox proportional hazards analysis.RESULTS: Veneering fracture was the most frequently observed fracture mode. The severity of fractures was significantly more in ceramic restorations than in metal ceramic restorations. Significantly more loading cycles until veneering fracture were estimated with metal ceramic restorations veneered with glass-ceramics than with other restorations.CONCLUSIONS: The metal ceramic restorations demonstrated fewer and less severe fractures and resisted more cyclic loads than the ceramic restorations, particularly when the metal ceramic crowns were veneered with glass-ceramics.
KW - Faculty of Health and Medical Sciences
KW - Oral Implantology
U2 - 10.1016/S0022-3913(12)60110-3
DO - 10.1016/S0022-3913(12)60110-3
M3 - Journal article
VL - 108
SP - 74
JO - Journal of Prosthetic Dentistry
JF - Journal of Prosthetic Dentistry
SN - 0022-3913
IS - 2
ER -
ID: 43476382